When we usually choose aluminum composite panels, do we know how to operate to make our products into the shape we want? What should we do in such a step as bending? Here we can do some related content for you Introduction, if you want to know, you can take a look.


1. First, take the measuring tool and mark the aluminum composite panels. After confirming the size, cut the aluminum composite panels. Then according to the required bending size, use the trimmer #6 trimming knife to trim the line with a depth of about 1.5 mm on the back of the aluminum composite panel.

Align the line repaired by the trimming machine, and bend hard to the position where the fracture occurs. Do not fold repeatedly to avoid the aluminum composite panels from breaking.

2. The depth of the trimming knife needs to be appropriate. If the depth of the trimming knife is too deep, the aluminum composite panel will be fragile and not round enough, but if the trimming knife is too shallow, it will cause the aluminum composite panel to be difficult to bend. .

High Gloss Aluminum Composite Panel

3. If we want to use arc bending, we first need to tear off the aluminum on the back of the aluminum composite panel with a tool, and the aluminum composite panel will be easily bent after tearing off.

4. If you want further processing, you need to use detailed work or wood to make the skeleton, and then pave a layer of 3~9 cm board as the base, and then paste it, the rounded corners will be very smooth.

You need to understand the knowledge, you can pay more attention to us, it should be a good help for you!